CDL A Jobs near Atlantic County NJ

NOTE: This position requires a valid New Jersey driver's license. Applicant must either possess or obtain ASE certification in suspension/steering or brakes within first 90 days of hire. Selected applicant must obtain a Class A CDL with Airbrakes, Tanker and Passenger Endorsement within 180 days of hire. Mechanic certification stipends/bonuses may be available when applicable.

Under direction, performs skilled mechanical work involving the maintenance, repair and servicing of various types of motor vehicles and/or motorized construction equipment; does other related work as required.

NOTE: The examples of work for this title are for illustrative purposes only. A particular position using this title may not perform all duties listed in this job specification. Conversely, all duties performed on the job may not be listed.

Requirements

Training

Successful completion of one (1) year of training in automotive technology at an accredited community college or vocational school.

Experience

Two (2) years of experience in the maintenance and repair of various types of motor vehicles and/or construction equipment such as bulldozers, tractors, cranes, road graders, power shovels, or similar equipment.

NOTE: Applicants who do not possess the required year of formal training may substitute one (1) additional year of experience as outlined above.

NOTE: An Automotive Service Excellence (ASE) Certification in one of the following specialties from the National Institute for Automotive Service Excellence may be substituted for the formal training: A-1 Engine Repair, A-6 Electrical/Electronic Systems, A-8 Engine Performance.

NOTE: The examples of work for this title are for illustrative purposes only. A particular position using this title may not perform all duties listed in this job specification. Conversely, all duties performed on the job may not be listed.

License

Appointees will be required to possess a driver's license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform the essential duties of the position.

Appointees may be required to possess a valid Commercial Driver's License (CDL) and applicable endorsements for the class and type of vehicle being operated.

NOTE: The responsibility for ensuring that employees possess the required motor vehicle license, commensurate with the class and type of vehicles they operate, rests with the Appointing Authority.

In accordance with Federal regulation 82:40, appointees responsible for the repair or servicing of motor vehicle air conditioners will be required to obtain and maintain a valid Air Conditioning and Refrigeration Technician, commensurate with the type of equipment serviced, issued by the Federal Environmental Protection Agency.

In accordance with N.J.A.C. 13:20-46.8, appointees responsible for performing the emissions inspections on diesel-powered vehicles will be required to successfully complete a course of Instruction on Diesel Emission Inspection provided through the Appointing Authority. Appointees may be required to successfully complete re-training.

In accordance with the New Jersey Occupational Safety and Health Administration regulation 29 CFR 1910.178(l) (1), appointees responsible for the operation of industrial trucks (powered forklifts) will be required to obtain and maintain a current certification as a Powered Industrial Truck Operator issued by the New Jersey Occupational Safety and Health Administration. Appointees may be required to successfully complete re-training.

In accordance with N.J.A.C 13:20-45.16, appointees responsible for performing emissions repairs to gasoline-fueled vehicles will be required to successfully complete the Emissions Technical Educational Program, and maintain a current certification as an Emissions Repairer Technician.

In accordance with N.J.A.C. 13:20-43.17, appointees responsible for performing inspections to motor vehicles will be required to successfully complete the training and maintain a current certification as a Motor Vehicle Inspector.

Appointees responsible for repairing or servicing motor vehicles equipped for alternate fuel will be required to successfully complete training and obtain an Alternate Fuel Certification. Appointees who possess an ASE Certification in Alternate Fuel are considered to have met this requirement.

Appointees responsible for repair and servicing of suspension/steering systems are required to possess and maintain an Automobile Service Excellence (ASE) Certification in Suspension and Steering.

Appointees responsible for repair and servicing of brakes are required to obtain an Automotive Service Excellence (ASE) Certification in Brake Repairs.

Appointees may also be required to obtain ASE certifications in Engine Repair A-1 and Engine Performance A-8.

Examples of Work

• Repairs engines and components, power trains, suspension systems, and other mechanical units of such motor vehicles as automobiles, vans, and/or such construction equipment as trucks, buses, bulldozers, tractors, cranes, road graders, power shovels, or similar equipment.
• Obtains description of mechanical problems from driver of vehicle and/or test drives the vehicle or uses testing equipment such as motor analyzers, spark plug testers, or compression gauges to locate and identify the problem.
• Locates worn, dirty, or poorly adjusted parts through visual check of vehicle or through the use of testing devices such as timing lights and dwell meters or other diagnostic equipment.
• Removes, cleans, or replaces defective parts such as spark plugs, wheel cylinders, mufflers, tail pipes, or brake shoes.
• Makes settings and adjustments such as setting distributors and voltage regulators, points, gapping spark plugs, setting engine idle and timing, and adjusting brakes.
• Removes units such as engine, transmission, or differential using wrenches and hoist.
• Disassembles unit and inspect parts for wear using micrometers, calipers, and thickness gauges.
• Repairs or replaces parts such as pistons, rods, gears, valves, and bearings using mechanic's hand tools.
• Overhauls or replaces carburetors, blowers, generators, distributors, starters, and pumps.
• Rebuilds parts such as crankshafts and cylinder blocks using lathes, shapers, drill presses, and welding equipment.
• Rewires ignition system, lights, and instrument panel.
• Relines and adjusts brakes, aligns front end, repairs or replaces shock absorbers, and solders leaks in radiator.
• Mends damaged body and fenders by hammering out or filling in dents and welding broken parts.
• Replaces and adjusts headlights and installs and repairs accessories such as radios, heaters, mirrors, and windshield wipers.
• Disassembles and rebuilds components by fitting and installing needed parts such as rings, pistons, bearings, and gears.
• Aligns, meshes, and connects repaired units to related mechanisms and makes adjustments to assure proper operation of units.
• Adjusts ignition timing and valves and adjusts or replaces spark plugs and other parts to ensure efficient engine performance.
• Installs air conditioners and service components such as compressors and condensers.
• Aligns and balances wheels and repairs steering and suspension systems.
• Adjusts brakes, replaces brake linings and pads, repairs hydraulic cylinders, and makes other repairs to the brake system.
• Cleans radiators, locates and solders leaks, and installs new radiator cores in vehicles.
• Overhauls and repairs electrical systems and components.
• Replaces defective wiring and electrical units in vehicles such as starters and generators.
• Repairs and replaces gear trains, couplings, hydraulic pumps, and other components of automatic transmission systems.
• In making repairs, uses a variety of tools, equipment, and testing devices such as pneumatic wrenches to remove bolts; lathes and grinding machines to rebuild brakes and other parts; welding and flame cutting equipment to repair exhaust systems; ammeters, ohmmeters, and voltmeters to locate electrical system malfunction; motor analyzers, spark plug testers, or compression gauges to locate mechanical problems; wheel balancing equipment to balance wheels; scientific testing equipment to help adjust and locate malfunctions in fuel, ignition, and emission control systems; and common hand tools such as screwdrivers, pliers, and wrenches to work on small parts and get to hard to reach places.
• Consults manufacturer or other manuals or charts to identify replacement parts or ascertain specified dimensions and tolerances of components.
• Welds broken parts and structural members.
• May direct workers engaged in cleaning parts and assisting with assembly and disassembly of equipment.
• Traces and locates defects and causes of mechanical problems to determine type and extent of repairs.
• Overhauls, rebuilds, repairs, and services diesel, gasoline, and other types of combustion engines, automatic and non-automatic transmissions, heavy duty drive line systems, hydraulic utility systems, and controls.
• Selects and makes repairs in accord with appropriate repair specifications, manuals, and procedures.
• Fits and installs parts such as pistons, valves, bearings, gears, and cylinders to appropriate tolerances and makes appropriate adjustments in accord with specifications and guidelines.
• Connects, aligns, and adjusts mechanical components to assure proper operation of the vehicle.
• Repairs cross driver or similar multisystem transmissions.
• Repairs large and powerful 12-cylinder engines with pist